Technical Portal for Sustainable Architecture
3D configurator for ventilated facades
Design your ventilated facade. View the result in 3D.
With the VM Group 3D Configurator, you can simulate the creation of a ventilated facade by defining the key geometric, architectural, and material characteristics of your project.
Set the building's dimensions, number of floors, and window placement; then, choose the cladding material, finish, and fixing system.
View the result in real time on a three-dimensional model and obtain an initial, indicative cost estimate for your configured solution.
How the configurator works
1. Define the shape and dimensions of the building
Select the building geometry and enter the main dimensions to set up the initial configuration.
2. Set up plans and windows
This is a paragraph. Click here to edit it and add your own text.
3. Choose material and finish
Select the cladding material from the available options and customize the appearance of the facade using the proposed finishes.
4. Select the mounting system
Compare the available options: visible clips, concealed fastening, and bonding.
5. View the result and consult the cost estimate
Examine the three-dimensional model, verify the total surface area to be covered, the indicative cost per square meter, and the total estimated cost.
From the configurator to the valuation request
Once the configuration is complete, you can enter your contact details and submit your request to VM Group.
You will receive a PDF document summarizing the configuration you have created. At the same time, VM Group will receive the requester’s details and the specifications of the configured solution, allowing them to assess whether further technical and financial discussion is warranted.
Note on economic evaluation
The result provided by the configurator is a preliminary, indicative estimate, intended to offer an initial sense of the costs involved in constructing a ventilated facade.
The actual cost may vary depending on the scale of the project, the total surface area to be clad, the project location, the choice of materials and finishes, the condition of the existing substrate, and any specific construction complexities.
To prepare a reliable technical and financial proposal, it will be necessary to review the project documentation and existing site conditions, as well as to conduct an on-site technical inspection, where required.
A definitive assessment will be prepared by VM Group, tailored to the specific requirements of the project.
Start configuring your ventilated facade
Access the 3D configurator and develop your initial cladding concept.
